Part Description:
The Brine Valve Assembly is a key functional component of the water softener, controlling the flow of brine solution into and out of the resin tank during the regeneration cycle. This assembly includes several precisely engineered parts that ensure smooth operation, proper sealing, and system efficiency.
Controls both the brine draw and refill phases, critical to the regeneration process that restores softening capacity
Multiple O-rings ensure a precision-fitted piston maintain a leak-free connection between the brine system and the valve body
Accurate control of flow rate (via the 0.5 GPM Flow Button) helps optimize salt usage and regeneration efficiency
A properly functioning brine valve protects other internal components from brine overflow or underperformance
Softener Not Drawing Brine
Water in Brine Tank Not Decreasing During Regeneration
Leaking at the Brine Valve Cap
Unusual Noises During Regeneration
Salt Bridges or Incomplete Regeneration
Compatible Models:
WaterBoss 700, 900, and 950
AquaMaster 700, 900, and 950
AquaMaster PRO 5000, 5100, and 5500
Always depressurize and bypass before servicing
Clean all mating surfaces, especially the piston seat and flow control opening, before assembly
Ensure the concave side faces the Brine Valve End Cap and is aligned using the four internal ribs
Use a twisting motion to insert the cap, then tighten screws evenly to avoid misalignment or cracking
Verify spring tension and free piston travel before final assembly to ensure proper function
Why It Matters:
In short, this assembly is small but essential—it’s the heartbeat of the regeneration process, and its proper function directly impacts the effectiveness and lifespan of the entire softener system. Please call technical support first to ensure this is the correct part for the issue you softener may be experiencing 1-800-437-8993 (EST).
Part Description:
The Brine Valve Assembly is a key functional component of the water softener, controlling the flow of brine solution into and out of the resin tank during the regeneration cycle. This assembly includes several precisely engineered parts that ensure smooth operation, proper sealing, and system efficiency.
Controls both the brine draw and refill phases, critical to the regeneration process that restores softening capacity
Multiple O-rings ensure a precision-fitted piston maintain a leak-free connection between the brine system and the valve body
Accurate control of flow rate (via the 0.5 GPM Flow Button) helps optimize salt usage and regeneration efficiency
A properly functioning brine valve protects other internal components from brine overflow or underperformance
Softener Not Drawing Brine
Water in Brine Tank Not Decreasing During Regeneration
Leaking at the Brine Valve Cap
Unusual Noises During Regeneration
Salt Bridges or Incomplete Regeneration
Compatible Models:
WaterBoss 700, 900, and 950
AquaMaster 700, 900, and 950
AquaMaster PRO 5000, 5100, and 5500
Always depressurize and bypass before servicing
Clean all mating surfaces, especially the piston seat and flow control opening, before assembly
Ensure the concave side faces the Brine Valve End Cap and is aligned using the four internal ribs
Use a twisting motion to insert the cap, then tighten screws evenly to avoid misalignment or cracking
Verify spring tension and free piston travel before final assembly to ensure proper function
Why It Matters:
In short, this assembly is small but essential—it’s the heartbeat of the regeneration process, and its proper function directly impacts the effectiveness and lifespan of the entire softener system. Please call technical support first to ensure this is the correct part for the issue you softener may be experiencing 1-800-437-8993 (EST).
